
You want your machines to last longer and be quiet, right? Rubber mounts help fix problems like shaking, loud sounds, and even damage to your machines at home or work. More people around the world want rubber, especially in factories. Rubber mounts keep your machines safe by soaking up shaking and stopping strong vibrations. This means your machines break less, need fewer fixes, and your space is safer. People use rubber for many things, like stopping shaking and keeping mounts steady, so you see rubber in many homes and factories.
Key Takeaways
Rubber mounts help lower shaking and noise. They keep machines safe. They also make places quieter and safer.
There are many kinds of rubber mounts. Each one fits a different need. Check the machine’s weight before picking one. Look at the type of shaking and where it will be used.
Some mounts, like nitrile and EPDM, are for factories. They can handle heat, chemicals, and bad weather. These mounts last longer in hard places.
Mounts work better if you install them right. Make sure the load rating matches the machine. This helps them last longer.
Picking the right mount saves money. It means fewer repairs and better machine work.
Quick Comparison of Rubber Mounts

Table Overview
Choosing the right rubber mounts can be hard. There are many options for homes and factories. This table shows the top 10 rubber mounts. It lists what each one does best and their main features. You can see which one is good for your project or machine.
Tip: Always check your equipment’s weight and the rubber type before buying. Some mounts are better for heavy machines. Others are better for things at home.
Name/Type | Best Use | Key Features |
---|---|---|
M8 Anti Vibration Rubber Isolator | Both | Steel and rubber combo, easy install, handles medium loads, good for motors and pumps |
Sorbothane Vibration Mounts | Industrial | High vibration absorption, soft rubber, great for sensitive lab gear |
Trelleborg Novibra Mounts | Industrial | Strong rubber, resists oil and heat, fits heavy machines |
Parker LORD Vibration Isolation | Industrial | Durable rubber, handles high RPM, works in tough conditions |
Neoprene Compression Mounts | Both | Neoprene rubber, resists weather, good for HVAC and home appliances |
EPDM Rubber Vibration Isolators | Both | EPDM rubber, resists UV and ozone, fits outdoor machines |
Metalastik Mounts | Industrial | Rubber bonded to metal, strong for big equipment, meets ISO standards |
Buna-Nitrile Rubber Sheets | Industrial | Nitrile rubber, resists chemicals, easy to cut for custom shapes |
Wedge Mounts | Both | Adjustable height, rubber base, fits uneven floors |
Vibration Insulation Plates | Both | Flat rubber plates, spread load, reduce noise, easy to install |
When you look at these mounts, check the rubber type. See how much weight each mount can hold. Some resist heat or chemicals. Industrial rubber mounts like nitrile and EPDM last longer in factories. Some mounts have steel for more strength. Others help make rooms quieter by stopping shaking.
Check if the mount fits your machine’s RPM and weight.
Make sure the rubber can handle the heat and liquids in your area.
If you need help, some companies like YNF Rubber can help you pick or make a mount.
If you choose the right rubber mounts, your machines work better and last longer. You will save money and have fewer problems later.
Top Rubber Mounts Reviewed

M8 Anti Vibration Rubber Isolator Mounts
M8 Anti Vibration Rubber Isolator Mounts are used at home and in factories. They work well for motors, pumps, and small generators. These mounts have both steel and rubber. This helps stop shaking and absorbs shocks.
Key Features and Specs:
Specification Aspect | Details for M8 M-Mount Rubber Isolator Mounts |
---|---|
Bolt Size | M8 |
Hardness Options (IRHD) | 40, 60 |
Dimensions (mm) | Diameter: 33, Height: 25 |
Maximum Load (N) | 200 (40 IRHD), 500 (60 IRHD) |
Maximum Bolt Torque (Nm) | 15 |
Features | Excellent vibration isolation, corrosion protected |
Pros:
These mounts save you money.
They keep machines quieter by absorbing energy.
You can use them in many ways.
Cons:
They need more space than metal springs.
Oil, sunlight, or chemicals can hurt the rubber.
The spring rate changes a lot.
They do not work well in high heat.
Why it made the list:
These mounts are a good, low-cost way to stop shaking and noise. They are simple and work for many machines.
Sorbothane Vibration Mounts
Sorbothane Vibration Mounts are great for stopping strong vibrations. Sorbothane is a special material. It acts like a liquid and a solid. It soaks up vibration and turns it into heat.
Best Use Case:
These mounts are good for lab tools, audio gear, and machines that need strong vibration control. They also help level things on uneven floors.
Key Features:
Stops high-frequency vibrations.
Works in hot and cold places.
Reduces noise very well.
Property | Sorbothane (Viscoelastic Polymer) | Other Materials (Rubber, Polyurethane, Metal Alloys) |
---|---|---|
Vibration Damping | Combines shock absorption, vibration isolation, and damping | Less combined effect |
Energy Dissipation | Converts vibration to heat efficiently | Less efficient |
Frequency Handling | Great for high frequencies | May struggle at high frequencies |
Acoustic Damping | Very efficient | Less effective |
Pros:
These mounts give the best vibration control.
They work in many temperatures.
They lower noise a lot.
Cons:
They cost more than regular rubber mounts.
Most homes do not need this much performance.
Why it made the list:
These mounts give the best protection for sensitive equipment. They keep your devices safe and quiet.
Trelleborg Novibra Mounts
Trelleborg Novibra Mounts are used in factories. They are found under big machines like compressors and pumps. These mounts use strong natural rubber.
Key Features and Specs:
Feature | Specification |
---|---|
Thread Size | M10 |
Diameter | 53 mm |
Foot Height | 15 mm |
Overall Height | 40 mm |
Material | Natural Rubber |
Compression Load | 70 kg |
Temperature Range | -55°C to +82°C |
Pros:
They last long and resist oil and heat.
These mounts work in hot and cold places.
They fit many heavy machines.
Cons:
They cost more than basic mounts.
You must check the size and load for your machine.
Why it made the list:
These mounts are trusted and work well. They help big machines run smoothly for a long time.
Parker LORD Vibration Isolation Mounts
Parker LORD Vibration Isolation Mounts use new rubber technology. You see them in planes, defense, and many factory machines. They help lower vibration and shock.
Best Use Case:
These mounts are good for both still and moving machines. They work well where there is a lot of vibration.
Key Features:
Technology Used |
---|
Rubber Bushings |
Center Bonded Mounts |
Dynaflex Couplings |
Flex-Bolt Sandwich Mounts |
Grommet Isolators |
Two-Piece Mounts |
Machinery Mounts |
Platform Mounts |
Micro-Mounts |
Pros:
There are many types for different machines.
These mounts help machines last longer.
They make things quieter and more comfortable.
Cons:
You must pick the right type for your machine.
Some types cost more than simple mounts.
Why it made the list:
These mounts use advanced technology and offer many choices. They protect your machines and help them work better.
Neoprene Compression Mounts
Neoprene Compression Mounts are used at home and in factories. You see them under HVAC units, washing machines, and pumps. Neoprene rubber does not get damaged by weather or dampness.
Key Features:
Stops high-frequency vibration.
Neoprene covering keeps out rust.
Easy to put in place, no bolts needed.
Can be flipped for more support.
Pros:
They make appliances quieter and last longer.
These mounts work well on hard floors.
They protect your machines from overloads.
Cons:
No big problems for home use.
Why it made the list:
These mounts are easy to use and stop vibration well. They are a smart pick for home and light factory use.
EPDM Rubber Vibration Isolators
EPDM Rubber Vibration Isolators are best for outdoor and rough places. You see them in HVAC systems, outdoor pumps, and building sites. EPDM rubber stands up to sun, rain, and chemicals.
Key Features:
Resists UV, ozone, and water.
Stays flexible in hot and cold.
Works well outside and in factories.
Pros:
They last long in bad weather.
These mounts do not crack easily.
They are good for outdoor vibration control.
Cons:
Not good with oil or fuel.
They do not dampen vibration as much as natural rubber.
Why it made the list:
These mounts last outside and work in tough weather. They are a top choice for outdoor vibration control.
Metalastik Mounts
Metalastik Mounts mix rubber and metal for extra strength. You find them under big machines in factories. They meet ISO standards, so they are reliable.
Best Use Case:
These mounts are for big machines that need strong support.
Key Features:
Rubber and metal together make them strong.
They hold heavy loads.
They meet ISO rules for industrial rubber.
Pros:
They last a long time.
These mounts support heavy machines.
They work well in tough places.
Cons:
They cost more than simple mounts.
You must match the size and load to your machine.
Why it made the list:
These mounts are trusted for the hardest jobs. They keep big machines safe and steady.
Buna-Nitrile Rubber Sheets
Buna-Nitrile Rubber Sheets are used in factories. You can cut them to any shape you need. They resist oil and chemicals, so they are good for many jobs.
Key Features:
Nitrile rubber resists oil and chemicals.
Easy to cut and shape.
Good for gaskets and pads.
Pros:
You can make them fit any machine.
They handle most chemicals.
These sheets are cheap and simple to use.
Cons:
Not good for high heat.
Not for outdoor use because of poor weather resistance.
Why it made the list:
These sheets are flexible and resist chemicals. They are great for custom jobs in factories.
Wedge Mounts
Wedge Mounts help level heavy machines. You see them in factories where machines must be flat and steady. The wedge design lets you change the height without moving the machine sideways.
Key Features:
Leveling bolts help set up machines just right.
Rubber base helps stop vibration.
They hold heavy loads and keep machines steady.
Pros:
They help machines stay level and last longer.
The rubber base cuts down on vibration.
These mounts make machines more stable.
Cons:
They are harder to install than simple mounts.
They add weight and height to your setup.
Why it made the list:
These mounts give the best stability and vibration control. They are perfect when you need machines to be level.
Vibration Insulation Plates
Vibration Insulation Plates are used at home and in factories. You can put them under washing machines, AC units, or big factory machines. They use layers of rubber, metal, or ceramic to block vibration and noise.
Key Features:
Flat plates spread weight and lower noise.
Made from rubber, metal, or ceramic layers.
Easy to put under most machines.
Plate Type | Home Applications | Industrial Applications |
---|---|---|
EVA Foam Pads | Small AC units, appliances, speakers | Light equipment needing deflection |
Cork/Neoprene Pads | Appliances where bolting isn’t possible | Non-critical vibration systems |
Steel/Rubber Pads | N/A | Chillers, pumps, boilers |
Load Bearing Pads | N/A | Heavy machinery, construction |
Pros:
They are easy to use and lower noise fast.
These plates fit many machines.
They help protect floors and equipment.
Cons:
Some types are not for heavy machines.
You must pick the right material for your job.
Why it made the list:
These plates are a simple way to cut vibration and noise. They work for both homes and factories.
Tip:
If you need help picking rubber mounts or want custom options, YNF Rubber can help and has many products.
Choosing Mounts for Your Needs
Application Assessment
When you choose a rubber mount, think about where you will use it. Is it for your house or for a factory? Each place needs different materials to stop vibration. You should check the temperature where you will use the mount. Also, see if there are oils or chemicals nearby. Look at what kind of machine you have. Some mounts work better in hot spots. Others are good if there are chemicals. Check the mount’s shape and size. Make sure it fits your machine well. See if the mount works with other parts in your system. If you need help, YNF Rubber has many mounts for homes and factories. Their mounts fit lots of uses and can handle tough places.
Tip: Always check how stretchy the rubber is. Make sure it can take heat and check the durometer rating before you buy.
Load & Vibration
Load and vibration are very important when picking mounts. If the mount is too weak, it can break or lose its shape. If it is too strong, it might not stop vibration enough. Match the mount’s load rating to your machine. For big machines, split the weight between all the mounts. Think about both still and moving forces. Softer rubber stops more vibration but holds less weight. Harder rubber holds more weight but may let more vibration through. Always look at the maker’s specs for load and vibration needs.
Load Factor | Why It Matters |
---|---|
Static Load | Stops the mount from bending |
Dynamic Load | Handles shaking and shocks |
Material Hardness | Balances support and stopping vibration |
Deflection | Keeps vibration control working |
Installation Factors
You want your rubber mounts to work well and last a long time. Look at how you will put them in place. Make sure the mounts can hold your machine’s weight and keep it steady. Check where the center of gravity is and where you will attach the mounts. Leave space for the mount to move a little. Pick rubber that can handle changes in temperature, water, and sunlight. If your machine faces oil or chemicals, pick mounts that resist those. For factories, safe installation is very important. The right elastomer helps mounts last longer and work better.
Note: Natural rubber is good inside, but silicone or EPDM lasts longer in tough places.
Cost vs. Performance
You want to get the most for your money. Cheaper mounts might save you money now but may not last long. Better mounts stop more vibration and last longer. They help you fix machines less often. Always balance price and how well the mount works. Pick mounts that stop vibration and last in your space. YNF Rubber has choices for every budget, so you can find a good mount without losing quality.
Choosing the right rubber mount makes a big difference for your machines and your peace of mind. When you pick the right one, you:
Protect your equipment by absorbing vibrations and reducing wear.
Improve safety and machine performance.
Lower noise and make your space more comfortable.
Save money on repairs and downtime.
Always check your needs, like load and installation. If you have a tricky setup, talk to a manufacturer or expert—YNF Rubber can help. Got questions or stories? Share them below!
FAQ
What is a rubber mount used for?
You use a rubber mount to stop vibration and noise from machines. It helps protect your equipment and keeps things running smoothly. You can use them at home or in factories.
How do I pick the right rubber mount?
First, check your machine’s weight and size. Next, look at the type of vibration. Then, choose a mount that matches your needs. If you feel unsure, ask a supplier like YNF Rubber for help.
Can I use the same mount for indoor and outdoor machines?
Not always. Some rubber mounts work better outside because they resist sun, rain, and chemicals. EPDM mounts are great for outdoors. For inside, natural rubber or neoprene works well.
How long do rubber mounts last?
Most rubber mounts last several years. Their life depends on heat, chemicals, and how much vibration they handle. If you see cracks or wear, it’s time to replace them.
Where can I buy quality rubber mounts?
You can find rubber mounts online or at hardware stores. For expert advice and many choices, check out YNF Rubber. They offer mounts for both home and industrial use.